POLYETHYLENE COMPOUND Description
PolyAzin-F 405C is a high density polyethylene compound containing 5% calcium carbonate. It offers excellent with stiffness and Environmental Stress Crack Resistance (ESCR), along with high rigidity and good flowability, making it ideal for small blow-molded products such as bottles. This grade is naturally colored and also available in custom colors upon request. Additionally, we offer tailor-made compounds based on customer-specific technical requirements.
Properties
| Physical | Typical Value | Unit | Test Method |
| Melt Flow Rate (190°C/ 5 kg) | 1.3 | g/10min | ISO 1133 |
| Density | 0.97 | g/cm3 | ISO 1183 |
| Mechanical | Typical Value | Unit | Test Method |
| Flexural Modulus | 1100 | N/mm2 | ISO 178 |
| Tensile Strength at Yield | 25 | N/mm2 | ISO 527 |
| Elongation at Yield | 8 | % | ISO 527 |
| Hardness shore D | 63 | Points | ISO 868 |
* This data is provided for reference only and is not intended for specification use.
Advantages
- High density and stiffness
- Excellent ESCR
- High rigidity
- Good flowability
- Good impact strength
Applications
- Small blow-moulded products
- Bottles
Processing Guidlines
- Recommended process: Blow molding
- Pre-drying: Not required under normal storage conditions, but if moisture is suspected, drying at 70°C for 2-3 hours is recommended.
- Processing temperature range: 180-210°C (depending on equipment and die design)
Note: Actual parameters should be optimized for your specific line and targeted applications.
Packaging & Storage
For optimal performance, Use within 6 months from production date
Supplied in 25 kg bags or 850 kg jumbo bags in granular form
Store in a dry, cool environment; avoid UV exposure and humidity